Web Store

Rear Crossmember Kit

SKU WS154460
$65.10
In stock
1
Product Details

A simple upper coilover/ shock mount crossmember for your rear suspension.

Crossmember kit to mount the top of coil-overs or ShockWaves in any frame that is 46″ or less between the frame rails. The 1-1/2″ x 1-1/2" x .125" wall square tube is 46″ long and will have to be cut to fit between the frame boxing plates. Anti-crush tubes are 1″ diameter, 2″ long for a 5/8″ bolt. Grade 5 bolts, 4-1/2″ long with washers and nuts are included.

Holes need to be drilled for the anti-crush tubes.

Also available with 7/16″ hardware to be used as a shock mounting crossmember.

WS154460
WS154465
WS154467

Save this product for later

 

15 Replies to “Web Store”

  1. Can I use Duralast Wires? I just bought some not to long ago, and I was wondering if I could just switch out the terminal ends and use those.

  2. im very interested in purchasing this upgrade,
    I have a very bad issue with my VR6, it turns over run for like a minute idling extremely rough and then shut down, I can maintain it on by playing with the gas pedal,
    anyways researching came across a lot of the same issues with people, not as bad as mine but the same, and in these case people do suggest coil pack failure, and then I see a best solution is this MSD upgrade.

    any suggestions.

    1. I can’t guarantee that this upgrade will solve your issue, but it will help it to run better once any other issues are addressed. Have you inspected the coil pack for cracks?
      Thanks for writing.
      DW

      1. Thanks for the reply, I actually need to do too end rebuild the previous owner ran it hot for a while and I think he warped the head so im going take care of that first but I will be done that upgrade regardless I’ve heard excellent things.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.